Need a HP Designjet GL/2 Card Fast? In Stock Ready to Ship Today

One Year Exchange Warranty!

If you are getting a 05:10 Error Code -- You Must Replace Your Formatter Board!!

HP Designjet 510 GL/2 Accessory Card

Updated Stock 11/25/16

Part Numbers CH336-60001, CH336-67001, CH336-80001

$225

click to >> BUY NOW 

HP Designjet 800 Formatter Board with Hard Disk

$280

click to >> BUY NOW 

HP Designjet 500 GL/2 Accessory Card

Part number C7772A

$149

click to >> BUY NOW 

HP Designjet T610 Formatter Board

Part Number q6711-67004 Q6683-67030 Q6683-60193 Q6684-60008

$219.99

click to >> BUY NOW 

HP Designjet T770 Formatter

Part Number ch538-67009

$219.99

click to >> BUY NOW 

HP Designjet T1100 Formatter Board

part #s: Q6683-67030 Q6683-60193 Q6684-60008 

$219.99

click to >> BUY NOW 

HP Designjet GL/2 Accessory Card or Formatter Board

The HP Designjet 500, HP Designjet 510, and the HP Designjet 800 all have what are called a GL/2 Accessory Card or Formatter Board installed. Both terms refer to the same part. These board provided advance CAD features and expanded memory. It is not uncommon for them to become defective and need replaced.

The feedback I get from customers is that the main cause of the error is the printer is left on continuously. Resulting in a power surge thru the line that corrupts the ROM chip. Make sure to check your ground to neutral reading on your outlets. Faulty wiring will result in more errors.

HP Designjet 05:10 Error Code

If you are getting a 05:10 Error Code -- You Must Replace Your GL/2 Accessory Card or Formatter Board. A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part. It is a simple fix. The card is located on the back side nearest the power cable plug. There are two expansion cards. One is the network card. The GL/2 card is labeled and needs to be replaced. Simply unscrew it and slide out of the slot.

Part Numbering System

HP has many part numbers for the same part. They like to issue a new part number for a new lot being released for consumption. Here is a breakdown of popular part numbers. Designjet 510 model has three different part numbers: Designjet 510 CH336-60001 Designjet 510 CH336-67001 Designjet 510 CH336-80001 Designjet 500 C7772A

Please confirm that you have a Designjet 500 printer. The 500 GL/2 Card will not work in a HP Designjet 510 printer. I have had several customers with a Designjet 510 purchase the 500 GL/2 Card. The 500 GL/2 Card does not work in their printer. This will caused delays with exchanging the 500 card for the 510 card.

HP Designjet 800 has nearly ten different part numbers.

Designjet 510 service manual response to the error System error 05:10

Recommended action:

Turn the printer off and unplug the power cable from the back of the printer.

Remove the HP-GL/2 accessory card and re-install the HP-GL/2 accessory card.

Click here for detailed instructions on HP-GL/2 accessory card removal .

Plug the power cable in, turn the printer on and attempt to verify functionality.

If the problem persists, click on Support at the top of the page for additional HP support and contact options.

System Error: 61:05

A related error is System Error: 61:05. A 61:05 is a formatter card with the sniffles before it becomes a cold (05:10) and needs replaced.

Designjet T Series System Error: 08:YZ (T series)

 

About me

I was an HP Customer Engineer from 1995-2002. During this time, I serviced contract and warranty calls within the Northern Indiana area. When I left HP, I took my Designjet service experience and started my own business servicing out of contract plotters. Designjetpartsfast.com was launched in 2009. With 20 years Designjet experience, I can help you resolve issues you are experiencing with your Designjet Printer.

Please call or email me with your Designjet questions. fixed@designjetpartsfast.com 260.348.5653

 

HP Designjet 510 Formatter $225

Designjet 510 Formatter Board Link
In Stock, ready to ship today.One Year Exchange Warranty.
A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part.

See this YouTube demo to learn more:

Designjet GL/2 Accessory Card or Formatter Board

The designjet 500, 510, and the 800 all have what are called a GL/2 Accessory Card or Formatter Board installed. Both terms refer to the same part. These board provided advance CAD features and expanded memory. It is not uncommon for them to become defective and need replaced.

The feedback I get from customers is that the main cause of the error is the printer is left on continuously. Resulting in a power surge thru the line that corrupts the ROM chip. Make sure to check your ground to neutral reading on your outlets. Faulty wiring will result in more errors.

Designjet 05:10 Error Code

If you are getting a 05:10 Error Code -- You Must Replace Your GL/2 Accessory Card or Formatter Board. A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part. It is a simple fix. The card is located on the back side nearest the power cable plug. There are two expansion cards. One is the network card. The GL/2 card is labeled and needs to be replaced. Simply unscrew it and slide out of the slot.

Part Numbering System

HP has many part numbers for the same part. They like to issue a new part number for a new lot being released for consumption. Here is a breakdown of popular part numbers. Designjet 510 model has three different part numbers: Designjet 510 CH336-60001 Designjet 510 CH336-67001 Designjet 510 CH336-80001 Designjet 500 C7772A

Please confirm that you have a Designjet 500 printer. The 500 GL/2 Card will not work in a Designjet 510 printer. I have had several customers with a Designjet 510 purchase the 500 GL/2 Card. The 500 GL/2 Card does not work in their printer. This will caused delays with exchanging the 500 card for the 510 card.

Designjet 800 has nearly ten different part numbers.

HP service manual response to the error System error 05:10

Recommended action:

Turn the printer off and unplug the power cable from the back of the printer.

Remove the HP-GL/2 accessory card and re-install the HP-GL/2 accessory card.

Click here for detailed instructions on HP-GL/2 accessory card removal .

Plug the power cable in, turn the printer on and attempt to verify functionality.

If the problem persists, click on Support at the top of the page for additional HP support and contact options.

System Error: 61:05

A related error is System Error: 61:05. A 61:05 is a formatter card with the sniffles before it becomes a cold (05:10) and needs replaced.

About me

I was an HP Customer Engineer from 1995-2002. During this time, I serviced contract and warranty calls within the Northern Indiana area. When I left HP, I took my Designjet service experience and started my own business servicing out of contract plotters. Designjetpartsfast.com was launched in 2009. With over 19 years Designjet experience, I can help you resolve issues you are experiencing with your Designjet Printer.

Please call or email me with your Designjet questions. fixed@designjetpartsfast.com 260.348.5653

HP Designjet 510 GL/2 Accessory Card Formatter Board $225

HP Designjet 510 Formatter Board On Sale: $225 CH336-60001, CH336-67001, CH336-80001   Is my plotter worth repairing?   Yes. Best price. It is easy and risk free.   Buy Here!   Do I get a warranty? One Year Exchange Warranty!   Will this part fix my plotter? If you are getting a hp designjet 510 error 05 10 or 05:10 Error Code -- You Must Replace Your Formatter Board. A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part. I even have a YouTube video showing how easy it is to replace.   What is the right part number?  HP revs up part numbers with new lots produced. On this model, there were three different lot numbers for the same part.    Do you have any feedback? Scroll down item description for positive feedback comments from satisfied customers. How does a defective core exchange work? THIS ITEM REQUIRES THE RETURN OF YOUR DEFECTIVE PART. USPS Pre-paid return shipping label will be emailed to you for the return of your defective part (US customers only).  When the package tracking number is registered on the USPS website, your new part will be shipped to you. If you require immediate shipment, a deposit for $100 is required. Refunded upon return of the defective core.   If you have any questions, please call me, Tom, at 260.348.5653.  The part you will receive will be tested and verified to work without errors by me -- A HP Certified Technician with 20 years experience. Feedback from satisfied customers: Colin on September 24 2015 Tom was a huge help. Our IT guy said that this machine was outdated and just to buy a new  one which is around $4,500-$6,000. I reached out to Tom for help due to the 05:10 error and  he told me to replace the formatter board. Easy plug an play, less than a 5 min fix and it  is back up and running like it should for less then $300! Thank you very much Tom! Rob on September 23 2015 Excellent service, prompt shipping, fair prices, plus plotter was up an running in no time,  what more can you ask for? Tom will be the first person I contact for future plotter part  purchases. Mircea on September 02 2015 Good price, quick service, great support. Tom was very knowledgeable and helpful in  identifying the problem and recommending the correct solution. The board worked perfectly  and our plotter was back in business in the minute following the card installation. This is  definitely the first place I’ll call in the future for any problem with HP devices … Sharon on August 17 2015 Tom was awesome! We needed this part right away and he went out of his way to help. We went  back and forth on the shipping method-and he was very patient for me. Also, gave us tips as  to why our cards kept getting ruined. I would definitely deal with Tom again. Frank on August 14 2015 at 04:40PM This is my second purchase from Tom. Thank you for having the right parts at a reasonable price. Ronald on August 14 2015 Finding the part for my hp designjet 500 was very easy to find on your site, Talking with Tom showed me what an expert he is in this field. Ordering was a dream(simple.) For action and delivery 100%. THANK YOU VERY MUCH. Ps.I have already recommended you to to my friends who can do with your service. Tony on May 05 2015 This was my third purchase from this place and all have been smooth and trouble free  transactions. fast shipping and product as described. will do business again and recommend  this seller. S. True on April 17 2015 Tom was very helpful and worked with me to see if I would be able to put an HP-GL/2 into my  HP Designjet 500 that didn’t have one installed. He sent it to me to see if it would work  and it worked flawlessly allowing me to print from a couple of our computers that haven’t  been able to send a print to our plotter for years. Will definitely come back for any  future needs. B Bouapha on April 07 2015 Tom was very accommodating in rushing our urgent need for our parts. We didn’t need  everything and he did not have a problem accepting our return. He is ALWAYS available and  in this industry, I’m pretty sure everyone agrees that we all need HELP ASAP!! Thanks for everything Tom! Steve on March 27 2015 Great service, quick shipping. What more can you ask for! Will reach out to Tom for future designjet plotter issues. N Enloe on March 21 2015 Quick service, excellent follow up, card worked first time we powered up. Will definitely use again. Ryan on March 11 2015 Tom is a super nice guy and easy to deal with. He explained everything to me with patience  and went out of his way to accommodate our need to have the 510 GL/2 card sent to me UPS  Next Day! Don’t know if the printer is fixed yet because I just ordered the part 5 minutes  ago, but I will keep my fingers crossed. Either way, Tom was great! * Designjet Formatter Boards One Year Exchange Warranty Terms & Conditions The part you will receive includes a One Year Exchange Warranty*. It is verified to work without errors by me -- A HP Certified Technician trained to work on the DesignJet 500 series printers since they were first introduced back in 2001.

HP Designjet 61:05 error

System Error: 61:05

A related error is System Error: 61:05. A 61:05 generally means the firmware on the Designjet is older than what the formatter board (GL/2 accessory card) requieres. Check the firmware. If it is less than version 4, you need to upgrade the firmware in order for the newer board to work.

Replacement Designjet 510 GL/2 Accessory Card

Part Numbers CH336-60001, CH336-67001, CH336-80001

$280

UPDATED 11/28/16

click to >> BUY NOW 

Replacement Designjet 800 Formatter

$299

click to >> BUY NOW 

Replacement Designjet 500 GL/2 Accessory Card

Part number C7772A

$149

click to >> BUY NOW 

Designjet GL/2 Accessory Card or Formatter Board

The designjet 500, 510, and the 800 all have what are called a GL/2 Accessory Card or Formatter Board installed. Both terms refer to the same part. These board provided advance CAD features and expanded memory. It is not uncommon for them to become defective and need replaced.

The feedback I get from customers is that the main cause of the error is the printer is left on continuously. Resulting in a power surge thru the line that corrupts the ROM chip. Make sure to check your ground to neutral reading on your outlets. Faulty wiring will result in more errors.

Designjet 05:10 Error Code

If you are getting a 05:10 Error Code -- You Must Replace Your GL/2 Accessory Card or Formatter Board. A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part. It is a simple fix. The card is located on the back side nearest the power cable plug. There are two expansion cards. One is the network card. The GL/2 card is labeled and needs to be replaced. Simply unscrew it and slide out of the slot.

Part Numbering System

HP has many part numbers for the same part. They like to issue a new part number for a new lot being released for consumption. Here is a breakdown of popular part numbers. Designjet 510 model has three different part numbers: Designjet 510 CH336-60001 Designjet 510 CH336-67001 Designjet 510 CH336-80001 Designjet 500 C7772A

Please confirm that you have a Designjet 500 printer. The 500 GL/2 Card will not work in a Designjet 510 printer. I have had several customers with a Designjet 510 purchase the 500 GL/2 Card. The 500 GL/2 Card does not work in their printer. This will caused delays with exchanging the 500 card for the 510 card.

Designjet 800 has nearly ten different part numbers.

HP service manual response to the error System error 05:10

Recommended action:

Turn the printer off and unplug the power cable from the back of the printer.

Remove the HP-GL/2 accessory card and re-install the HP-GL/2 accessory card.

Click here for detailed instructions on HP-GL/2 accessory card removal .

Plug the power cable in, turn the printer on and attempt to verify functionality.

If the problem persists, click on Support at the top of the page for additional HP support and contact options.

About me

I was an HP Customer Engineer from 1995-2002. During this time, I serviced contract and warranty calls within the Northern Indiana area. When I left HP, I took my Designjet service experience and started my own business servicing out of contract plotters. Designjetpartsfast.com was launched in 2009. With over 19 years Designjet experience, I can help you resolve issues you are experiencing with your Designjet Printer.

Please call or email me with your Designjet questions. fixed@designjetpartsfast.com 260.348.5653

 

With respects to the driver . . .

Go to this link and download the RTL and try loading and printing from it:

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=377958&prodTypeId=18972&prodSeriesId=25302&swLang=8&taskId=135&swEnvOID=228it

How to replace a HP Designjet T520 Main PCA Board

Designjet T520 Main PCA Board Service Notes

If after replacing your new board the HP Logo is stuck, this service note will fix it.

Designjet T series Diagnostics Boot Mode

Turn off the plotter using the power button on the menu. Now turn back on and use the instructions below to enter diagnostics mode.



Entering the Diagnostics Menu

1. Make sure the printer is switched off with the Power key on the front of the printer and not with the power switch on the back of the printer.

2. Press and hold the Up and OK keys. While holding the Up and OK keys down, press the Power key to turn on the printer, then release it while continuing to hold down the Up and OK keys. Wait until the HP logo appears in the front-panel display, then release all keys.

3. In the Diagnostics menu, select a diagnostic test with the arrow keys and press the OK key to begin the highlighted test.



NOTE: The Diagnostic Tests and Utilities work in a special mode that does not require the full initialization of the printer. Therefore, whenever you have finished a test, you must power off the printer and power on again before trying to print or before executing another test. NOTE: In some cases a quick press of a button may not be recognized by the printer. When pressing a button, be sure to press it deliberately and all the way to the bottom of its travel. NOTE: If the printer hangs up during a test, switch the printer off and restart from step 1.

Designjet Formatter Boards One Year Exchange Warranty Terms & Conditions

Documentation required for exchange of a defective part under warranty:

1. Sales Receipt no later than one year old.

2. Tracking number of delivery confirmation that original defective board had been returned.

3. Defective replacement part must be returned first. Mark EXCHANGE on package.

Tom Bush, Tabcom, Inc., 8331 Waterswolde Lane, Fort Wayne, IN 46825

4. Upon receipt, a replacement part will ship.

5. Warranty continues until one year from the original sales date has expired.

Designjet Belt Sale $9.99

Designjet Belts

There are two easy ways to tell if your designjet 500 or designjet 800 printer needs its belt replaced. The first way is the most obvious, the carriage is jammed and will not move. Mostlikely, what has happened is the belt has become so frayed that it has split and is wrapped around the motor head on the right side. The other symptom of a faulty belt is a system error 86:10. This error generally indicates the belt is approaching the same state as the first case described.

The 86:10 error also may be due to a dirty encoder strip. The encoder strip is the metal strip running the length of the carriage axis and is how the carriage knows where it is located during the plot. Generally, taking a damp paper towel and wiping both sides of the encoder strip clean with your thumb and fore finger will clean it well enough to remedy it.

The best way to determine if your belt is defective is to open the front window and look below the belt the whole length of the printer. Specifically, run you finger along the axis below the belt and see if there are tiny black belt particles on the metal chassis. If there are, this is a good indication that your belt is defective and needs replaced.

To replace the belt, please watch the youtube videos provided in the product link.

Also, if you have any questions, please call me at 260.348.5653.

Part Numbering System

HP has many part numbers for the same part. They like to issue a new part number for a new lot being released for consumption. With carriage belts, the part numbering system is pretty simple.

Designjet 500, 510, and 800 24" belts are C7769-60182

Designjet 500, 510, and 800 42" belts are C7770-60014

HP service manual response to the system error 86:10

Carriage-Axis shutdown.

If this error code appeared but was NOT caused by a paper jam, then try the following:

> Too much friction in the Slider Rod. Enter the Printer Information utility (⇒ Page 4-26) and check the Scan-Axis usage. If the percentage is close to 100%, then lubricate the Slider Rod.

> The Carriage is bumping into the Service Station. If the carriage is stuck at the right hand side of the Printer and cannot be moved out to the center of the Print Platen it is because the Service Station cannot uncap the Printheads. In this case replace the Service Station/Aerosol Fan Assembly ⇒ Page 8-52.

> Perform the Carriage Movement test ⇒ Page 4-8.

System Error: 61:05

A related error is System Error: 61:05. A 61:05 is a formatter card with the sniffles before it becomes a cold (05:10) and needs replaced.

Please call or email me with your Designjet questions. fixed@designjetpartsfast.com 260.348.5653

Designjet 450c Line Sensor error

If your Designjet 450c fails to detect the edge of the paper when loading, your line sensor on the carriage assembly AND trailing cable needs to be replaced. Over time, the trailing cable will wear out and short the line sensor, which is located on the carriage assembly.

 

Your one sources for complete Designjet repair satisfaction

You can save thousands of dollars repairing your own Designjet plotter. I'm often asked, 'how long will my plotter last if I repair it myself?' The answer I've been using as a general rule is 4 to 5 years. With affordable replacement parts, fast delivery, detailed youtube instructions, and access to an experienced technician -- you have found your one sources for complete Designjet repair satisfaction.